PLANET VC-203PT PoE over Coaxial Extender – Transmitter

จำนวนครั้งที่เปิดดูสินค้า : 5750 | ความคิดเห็น: 0

PLANET VC-203PT PoE over Coaxial Extender – Transmitter

เพิ่มเมื่อ: 2017-06-19 14:20:08.0

แก้ไขล่าสุด: 2019-05-13 13:13:36.0

เบอร์โทรติดต่อ: 062-5193997 , 02-4582949

อีเมลล์: krieng.nt@gmail.com

รายละเอียด:
VC-203PT PoE over Coaxial Extender – Transmitter (สินค้ารับประกัน 3 ปี)

6900.00 บาท

PLANET VC-203PR

VC-203PR PoE over Coaxial Extender – Receiver

PLANET VC-203Px series of PoE over Coaxial Extender is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 1000m (3280ft) to PoE IP camera, PoE Wireless AP and any 802.3af/at complied powered device (PD).

The VC-203Px consists of a Transmitter and Receiver set which can work in pair without any power adapter and anywhere on your network infrastructure. The solution contains two brand-new products:

VC-203PT: 1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter

　 VC-203PR: 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver

Models		VC-203PT	VC-203PR
Power over Coax. Extender		Transmitter	Receiver
Power Input (Optional)	PoE	RJ-45: 802.3af/at PoE In UTP cable, up to 100m	BNC: PoE over Coaxial In Coaxial cable, up to 1km
Power Input (Optional)	DC	DC Jack: 52~56V DC In	DC Jack: 52~56V DC In
Power Output	PoE	BNC: Power over Coaxial Out Coaxial cable, up to 1km	RJ-45: 802.3af/at PoE out UTP cable, up to 100m
Power Output	DC	--	2-Pin Terminal Block : Selectable 12V/24V DC

Features

Physical Port

1 x 10/100Base-TX RJ-45 copper interface (PoE IN)
1 x BNC connector (Power and data transmitter)

Power over Ethernet

Eliminates Power cabling with PoE over Coaxial
Ethernet over coaxial up to 1km with 5C2V/RG6 75Ωcable
Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet on RJ-45 port
Supports PoE Power up to 30.8 watts (Varying with Power Source and Coaxial Distance)

Layer 2 Features

Supports auto-negotiation and 10/100Mbps half / full duplex
Prevents packet loss with back pressure (half duplex) and IEEE 802.3x pause frame flow control (full duplex)

VDSL2 Features

One box design, Master / Slave selectable via DIP Switch
Defines asymmetric (Band Plan 998) and symmetric band plans for the transmission of upstream and downstream signals

Industrial Case / Installation