D-LINK DAP‑2610
DAP‑2610 AC1300 Wave 2 Dual-Band Wireless Access Point Gigabit PoE, Wireless AC Wave 2, Supports MU-MIMO & Beamforming, 2.4GHz: 400Mbps & 5GHz: 867Mbps; 3dBi internal antenna for 2.4GHz, 3dBi internal antenna for 5GHz
รองรับความเร็วสูงสุด 867 Mbps ที่ความถี่ 5 GHz และ 400 Mbps ที่ความถี่ 2.4GHz ขนาดเสาสัญญาณ 3 dBi จำนวน 2 เสา
มีพอร์ต 10/100/1000 Mbps 1 พอร์ต โดยรองรับการจ่ายไฟผ่านสายแลน
- Easy to manage with D-Link’s free management software-based solution, Nuclias Connect
- Superior throughput with Dual-band transfer speeds up to 400 Mbps in the 2.4 GHz band and 867 Mbps in the 5 GHz band
- MU-MIMO technology improves connection by allowing data transfer with multiple devices at the same time
- Band Steering makes sure connected devices get the best available frequency band
- Beamforming effectively concentrates signal at the area it is required most, improve both speed and stability
- Gigabit LAN port for high-capacity backhaul to the wired network
- Supports multiple AP modes to ensure optimization based on your network’s needs
- Supports Power over Ethernet (802.3af) for simpler installation with less cable clutter
- Simple, soft-edge design, ideal for subtle visibility when wall or ceiling mounted (mounting hardware included)
- Supports multiple VLANs for enhanced network management and up to 16 SSID setups
- Supports WPA2™ – WiFi security for more protection
- MAC Address Filtering and WLAN Partitioning ensure control of your network’s access
- Works as a standalone AP or as part of a centralized, scalable multi-device deployment
High-performance Connectivity
- IEEE 802.11ac Wave 2 wireless1
- Combined wireless speeds of up to 1,300 Mbps1
- MU-MIMO with beamforming
- Band steering
- Gigabit LAN port
Multiple Operation Modes
- Access Point, Wireless Distribution System (WDS), WDS with AP, Wireless Client
Extensive Management
- D-Link Nuclias Connect support for centralised and additional configuration options
- Web, SSL, SSH and Telnet management
- SNMP v1, v2c, v3
Trusted Security Features
- WPA/WPA2 Personal/Enterprise
- 64/128-bit WEP
- MAC filter and WLAN partitioning
- Local/POP3/RADIUS/PassCode/LDAP authentication for captive portal
Convenient Installation
- Small form factor design for easy placement
- Supports 802.3af Power over Ethernet for remote installation
- Wall and ceiling mountable2
Device Interfacest
- IEEE 802.11a/b/g/n/ac Wave 2 wireless1
- 1 Gigabit LAN (supports PoE)
Standards
- IEEE 802.11a/b/g/n/ac1
- IEEE 802.3u/ab
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- IEEE 802.3af Power over Ethernet
Antennas
- 2 internal dual-band 3 dBi omni antennas
Operating Frequency
- 2.4 GHz band: 2.4 to 2.4835 GHz
- 5 GHz band: 5.15 to 5.35 GHz, 5.47 to 5.85 GHz
Maximum Output Power
- 20 dBm for 2.4 GHz
- 20 dBm for 5 GHz
Data Signal Rate
2.4 GHz
- Up to 400 Mbps
5 GHz
- Up to 867 Mbps
Security
- WPA-Personal
- WPA-Enterprise
- WPA2-Personal
- WPA2-Enterprise
- WEP 64/128-bit encryption
- SSID broadcast disable
- MAC address access control
- Network Access Protection (NAP)
- Internal RADIUS server
Network Management
- Telnet
- Secure Telnet (SSH)
- Web (HTTP) ]
- Secure Socket Layer (SSL)
- Traffic control
SNMP v1/v2c/v3
- Nuclias Connect Software
- Nuclias Connect Hub5
LEDs
- Power/status
Dimensions
- 170 x 170 x 28 mm (6.69 x 6.69 x 1.1 inches)
Weight
- 314 g (0.69 lbs) without mounting base
Power Supply
- External power adapter: 12 V/1 A (not included)
- IEEE 802.3af PoE
Maximum Power Consumption
- 12 W
Temperature
- Operating: 0 to 40°C (32 to 104°F)
- Storage: -20 to 65°C (-4 to 149°F)
Humidity
- Operating: 10% to 90% non-condensing
- Storage: 5% to 95% non-condensing
- > 30,000 hours
Certifications
- FCC
- IC
- CE4
- UL
- Wi-Fi Certified
|
|
|
|