PLANET VC-204
VC-204 4-Port 10/100Mbps Ethernet over VDSL2 Bridge (Profile 17a)
Ethernet Distance Extension
Two VC-204 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/55Mbps. Telephone service can still be used while the modems are in operation. The two solutions listed below are typical applications for the Ethernet over VDSL converter.
MTU / MDU / Hospitality Solution
The VC-204 is a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units) , commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/55Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provisioned.
Last Mile of FTTx deployment
The VC-204 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers´ home. The 10/100Mbps port of VC-204 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built by Internet because every room or house could use the existing phone line to transmit data through the Internet and the whole building could share the Internet to the wider area network with minimum cost.
Specification
Hardware Specification | |
Operating Temperature | 0~50 Degree C |
Storage Temperature | -25~70 Degree C |
Operating Humidity | 10~90%, relative humidity, non-condensing |
Power Requirement | 5V DC 2A |
Dimension (W x D x H) | 155 x 86 x 26 mm |
Weight | 0.38 kg |
Performance | Full VDSL2 bandwidth up to: (Down Stream / Up Stream) • Asymmetric Mode - 200m -> 100/55Mbps - 400m -> 90/50Mbps - 600m -> 70/40Mbps - 800m -> 60/25Mbps - 1000m -> 45/15Mbps - 1200m -> 35/10Mbps - 1400m -> 30/6Mbps - 1600m -> 25/4Mbps • Symmetric Mode - 200m -> 90/90Mbps - 400m -> 90/90Mbps - 600m -> 70/70Mbps - 800m -> 55/50Mbps - 1000m -> 40/35Mbps - 1200m -> 30/25Mbps - 1400m -> 25/20Mbps - 1600m -> 20/15Mbps |
LED Indicators | • One Power • 4 for RJ-11 / VDSL2 WAN : - Green, ACT - Green, Sync - Green, CO mode - Green, CPE mode • 1 for per RJ-45 10/100Base-TX port - Green, LNK / ACT |
Cabling Type | • 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft) • 100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft) • VDSL: twisted-pair telephone wires (AWG24 or better) up to 1.6km |
Encoding | • VDSL-DMT - ITU-T G.993.1 VDSL - ITU-T G.997.1 - ITU-T G.993.2 VDSL2 (Profile 17a Support) |
Functionality | • CO / CPE mode select • Selectable fast and interleaved mode • Selectable target band plan • Selectable target SNR mode |
DIP Switch | 4 position DIP switch |
Ports | 10/100Base-TX: 4 RJ-45, Auto-negotiation and Auto-MDI / MDI-X VDSL: 1 RJ-11, female Phone Jack PHONE: 1 RJ-11, Built-in splitters for POTS connection |
Storage Humidity | 10~90%, relative humidity, non-condensing |
Switch Specification | |
Switch Processing Scheme | Store-and-Forward |
Address Table | 2K entries |
Flow Control | Back pressure for half duplex IEEE 802.3x Pause Frame for full duplex |
Switch fabric | 1.6Gbps |
Throughput (packet per second) | 11.9Mpps |
Network cables | 10/100Base-TX: 2-Pair UTP Cat. 3,4, 5 (100meters, max.) EIA / TIA-568 100-ohm STP (100meters, max.) |
Standard Conformance | |
Regulation Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX ITU-T - G.993.1 (VDSL) - G.997.1 - G.993.2 VDSL2 (Profile 17a ) |
ติดต่อเรา
krieng.nt@gmail.com
www.108connect.co.th
|
|
|
|